Explore Knowledge Articles
Explore Quick Installation Guides
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
View support resources for the full range of Maestro designer light controls, fan controls, sensors and timers
-
Do dimmable LED bulbs save energy as you dim them?
Yes. Dimming LEDs saves energy at roughly a 1:1 ratio. In other words, dimming 50% will save about 50% energy.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Do I need a ground connection?
No, you don't need a ground connection.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
What is the minimum load?
The minimum load for this LED+ dimmer is 10W of Halogen/Incandescent or one LED off of the approved LED bulb list (unless otherwise noted on the list). You can find compatible bulbs for this dimmer on our LED Compatibility Tool.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Will the sensor detect motion through glass?
No, these sensors will not detect motion through glass.
Was this FAQ helpful?Thank you! We appreciate your feedback!
