Explore Knowledge Articles
Explore Quick Installation Guides
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
Applied Filter: Sensors > Dimmer > MS-Z101-V
If you don't know your model number, try browsing for it here
- LED / CFL
- Incandescent / Halogen
- Magnetic Low Voltage
- Electronic Low Voltage
- Fluorescent / LED 3-Wire
- Companion
LED / CFLIncandescent / HalogenMagnetic Low VoltageElectronic Low VoltageFluorescent / LED 3-WireCompanionDimmer-FanDimmer-SwitchDimmer-TimerDimmerDual CircuitDual TechDual Tech Dual CircuitSwitch -
View support resources for the full range of Maestro designer light controls, fan controls, sensors and timers
-
Can I use two Maestro sensors in a 3-way application?
No. You'll need to use a mechanical 3-way switch or a Maestro companion switch (model MA-AS) in the other location. Note: Lutron companion dimmers (model MA-R) are not compatible with this sensor. If your application is larger than a 3-way, you'll need to use Lutron companion switches.
Looking for other products?
No Results Found! Please enter valid model number to search.
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.