Explore Knowledge Articles
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
Caséta is a smart lighting control system that is a great solution for giving any client smart lighting control.
-
Can I control a dimmer with more than one Pico remote?
Yes. You can pair up to 10 Pico remotes to each Caseta Wireless dimmer/switch. This is an excellent way to add a new point of control even if there is no wiring there! For more info on Pico remotes, please see this KNOWLEDGE ARTICLE.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Can I control more than one dimmer with a Pico remote?
Yes. Pico remotes can control multiple lights, which is helpful if you want to turn on lights from your car or turn off lights from your bedside.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Can I control more than one dimmer/switch with a Pico remote(s)
Yes. Pico remotes can control multiple Caseta Wireless dimmers/switches. This allows you to control multiple lights from your bedside or car. For more info on Pico remotes, please see this KNOWLEDGE ARTICLE.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
How do I pair a Pico remote with a Caséta Wireless dimmer without a Lutron Smart Bridge?
Simply press the “off” button on the dimmer and hold it for 6 seconds (the LED on the Pico will flash). Then repeat this with the Pico you wish to pair. When the Pico is successfully paired, the light bulb flashes three times.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
How far from the dimmers can I use my Pico remote?
A Pico remote will work at least 30 feet away from any dimmer paired with it, and will work through walls, furniture, or other obstacles in your home. (The open-air range may be much further than 30 feet.)
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Is the in-wall dimmer difficult to install?
No. The in-wall dimmer wires like a standard switch and does not need a neutral wire. You can probably install it in about 15 minutes.
Was this FAQ helpful?Thank you! We appreciate your feedback!