Explore Knowledge Articles
Back
Pairing A Pico Remote to A Lutron Roller Shade
Pairing a Pico Wireless Control to Lutron Roller Shades
If your shades are not part of a Lutron system, such as Caséta, RadioRA, or HomeWorks, you will need to assign a Pico Wireless Control to control your shade.
Note: If you pair your shades to a Pico Wireless Control and would like to later add them onto a Lutron system, the shade must be restored to factory default settings.
For help restoring your shade to factory default settings, refer to the article Restoring Your Shade to Factory Default Settings.
Pairing a Pico Remote
To pair a Pico, you must access the shade button located on the drive. For help locating the shade button, review Putting your Shade into Service Position and Close Quarters Installations.
Step 1: Tap the shade button on all the shades you want assigned to the Pico. The shade button will illuminate solid green.
Step 2: Press and hold the Close button on the Pico remote for about 10 seconds until the shade button flashes green and turns off.
The Pico remote is now paired with the shade.
Was this article helpful?
Thank you! We appreciate your feedback!