
Explore Knowledge Articles
Restoring A Lutron Roller Shade To Factory Default
How to Restore Your Lutron Roller Shades to Factory Default
Restoring your shade to its factory default settings removes all control assignments and favorite programming. Upper and lower limits are not affected.
Restoring Your Shade to Factory Default Settings
Access to the shade button on the drive is required to return the shade to its factory default settings.
Click here for the steps to put your shade into service position to access the shade button
Step 1: Push up on the release tab on the left shade bracket. This is the same for both bracket assembly types, A, and B.
Step 2: While holding the release tab, slide the bracket forward to expose the battery tray and shade button.
Follow the steps below to default your shade once it is in service position:
Step 1: Tap the Shade Button quickly three times and hold the Shade Button after the third tap until the Shade Button LED flashes GREEN rapidly.
Step 2: Immediately tap the Shade Button quickly three more times, until the Shade Button LED flashes GREEN rapidly, then flashes RED/GREEN three times, and turns off.