Caséta Support

Lutron Roller Shade Service Position and Removal for Close Quarters Installations 

Putting Your Shade into Service Position 

Step 1: Push up on the release tab on the left shade bracket. This is the same for both bracket assembly types, A, and B.

Step 2: While holding the release tab, slide the bracket forward to expose the battery tray and shade button.

For Close Quarters Installations 

Note: If you do not have enough room to fully remove the battery tray or access the LED (shade button) due to a nearby wall or other obstruction, you will need to remove the shade.

Step 1: Push up on the release tab on the left shade bracket and slide the shade bracket out. This is the same for both bracket assembly types, A, and B.

Step 2: 

Type A: Separate it from the left mounting bracket by pressing the release tab in the center of the bracket and separate the two pieces.

Type B: Separate it from the left mounting bracket by pressing the release tab and separate the two pieces.

Step 3: 

Type A: With the shade angled down at least 30°, gently lift the idler out of the top of the socket of the Right Bracket assembly and remove the shade completely.

Type B: Gently pull the shade to the left to disengage the shade idler from the idler axle on the Right Shade bracket and remove the shade completely.