Explore Quick Installation Guides
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
View support resources for the full range of Sunnata light controls and dimmers.
-
Can you dim from both locations in a 3-way?
Yes, you can use one Sunnata Pro dimmer with up to 4 Sunnata Pro companion dimmers (model ST-RD) to dim from every location. Each Pro companion has a matching light bar.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
If the device being removed has wires instead of screws, what wire do I tag in a 3-way application?
If the device you are removing has wires leads, then tag the wire coming from the wall that is connected to the different colored wire from the device you are removing. This is the common wire.
Was this FAQ helpful?Thank you! We appreciate your feedback!
