Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
Vive
-
How many wireless devices can I link up?
You can link up to 10 Pico remotes and 10 Radio Powr Savr occupancy sensors along with one daylight sensor (up to 21 total devices).
Was this FAQ helpful?Thank you! We appreciate your feedback! -
How far away can I control these units with a wireless device?
Wireless devices can communicate to the master control from 30' away through walls and from 60' away if you have line-of-sight.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Where can I buy this? Can I install this?
The DFSCJ is only installed by OEM manufacturers (lighting manufacturers who use Lutron controls/drivers with their fixtures) and cannot be purchased separately or installed on-site into a pre-existing fixture. To purchase one of these fixtures, please visit our HPFL page or contact your local Lutron rep (www.lutron.com/wheretobuy).
Was this FAQ helpful?Thank you! We appreciate your feedback!