Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
Vive
-
#017 - Common Neutral Interaction
-
#423 - Installing a PowPakTM Module Inside a Junction Box
-
#432 - Warehouse aisle wireless sensors
-
#556 - PowPak Fixture-Mounted Controls Additional Programming, Installation, and Troubleshooting Help
-
#559 - Dimming Low-Voltage LED MR16 Lamps
-
#563 - Lutron / Automated LogicR BACnet Integration
-
#617 - Lutron / Schneider ElectricR BACnet Integration
-
#620 - PowPak Wireless Fixture Control Supplemental Design
-
#628 - Emergency Lighting with a Vive System
-
#637 - NEMA SSL 7A DIMMER COMPLIANCE LIST Including Compliance With CA TITLE 24
-
#684 - Using Vive for Exterior Daylight Control
-
#694 - Title 24 Demand Response Using OpenADR with Lutron Commercial Lighting Control Systems
-
#740 - Controlling Lutron QS Shading Solutions in Vive
-
#753 - Installing a Vive 347 V Dimming Module with 0-10V Control
-
#767 - Vive Trims and Power Savings