Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
Vive
-
Contractor Quick Start Guide for the Vive Integral Fixture Controls
-
FCJS-ECO
-
Fixture Control Digital Link Interface
-
Lutron's software support policy
-
PowPak CCO Module (BAA Compliant)
-
PowPak Dimming Module with 0-10V Control (BAA Compliant)
-
Powpak Dimming Module with EcoSystem Control
-
RMJS-20RCCO1DV-B Install Guide
-
Vive 347V Emergency Dimming Module with 0-10V Control
-
Vive Emergency 347V Relay Module
-
Vive Emergency PowPak Phase Select Dimming module
-
Vive Integral Fixture Controls (OEM Install Guide)
-
Vive System Programming User Guide
-
Vive Wireless Receptacles