Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
Vive
-
3-Wire Fluorescent Power Module - Revit Download
-
Phase Adaptive Power Module - Revit Download
-
Pico Line-Powered Wireless PJL- (2/3 Button)
-
PowPak 0-10V Dimming Module
-
PowPak Contact Closure Output Module
-
PowPak Fixture Sensor
-
PowPak Relay Switching Modules
-
Premium Vive Hub Flush Mount
-
Premium Vive Hub Sruface Mount
-
Switching Power Module - Revit Download
-
Vive 347 V PowPak Dimming Module with 0 -10 V Control
-
Vive Hub Flush Mount
-
Vive Hub Surface Mount
-
Vive Maestro - 0-10V Dimmer and Occupancy Sensor
-
Vive Maestro - 0-10V Dimmer and Vacancy Sensor