Explore Quick Installation Guides
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
View support resources for the full range of Sunnata light controls and dimmers.
-
Can I install Sunnata dimmers in a 4-way application?
Yes. The Sunnata LED+ dimmer can be used with the Accessory switch to switch the lights from up to 10 total locations. The Sunnata Pro dimmer can be used with the identical Pro Companion dimmers to dim the lights from up to 5 total locations.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Can this be installed in a 4-way application?
Yes, this can be used in a 4-way with up to 9 additional Sunnata Accessory Switches, model ST-AS. Every location other than the main dimmer must be the Sunnata Accessory Switch.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Does Sunnata require a neutral wire?
Sunnata LED+ dimmers do not require a neutral wire and can be used in any home. Sunnata Pro dimmers and the Sunnata switch will require a neutral wire for operation.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
If the device being removed has wires instead of screws, what wire do I tag in a 3-way application?
If the device you are removing has wires leads, then tag the wire coming from the wall that is connected to the different colored wire from the device you are removing. This is the common wire.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
What features are adjustable on this product?
There are a few features that you can adjust on the Sunnata touch dimmer, such as Low-End Trim, High-End Trim, Preset Light Level, Light Bar Brightness, and the Light Level Indicator/Nightlight. For more information on how to adjust these features, please check out our Walk Through Tutorial or Advanced Feature Guide.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
What is the difference between the STCL-153P and STCL-153M.
The STCL-153P is obsolete and will not be compatible with Sunnata Accessory Switch and cannot be used in a 4-way. The STCL-153P also does not have the delayed fade-to-off feature. Model STCL-153M is compatible with up to 9 Accessory Switches and includes the delayed fade-to-off feature.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Where can I go for additional wiring help?
You will be able to find a video, diagram, and a step-by-step walk through for this product on Lutron’s Wiring Wizard.
Was this FAQ helpful?Thank you! We appreciate your feedback!
