This article covers setting limits on your Lutron Serena, Triathlon, and Palladiom Wire-free shades using a Pico remote control.

 

This article is expected to take less than 5 minutes to complete.

Knowledge Article Contents:

Before You Begin

1: Set the Upper Limit

2: Set the Lower Limit

3: Test Upper and Lower Limits

Related Articles

Before You Begin

If your shades are already paired to a Pico Wireless Remote skip to Section 1: Set the Upper Limit.

If your shades are not paired with a Pico Wireless Remote, please follow the instructions below:

Note: See the Related Links if you are using a 4-group RF remote control or setting limits in the Lutron app.

 

 

1. Tap the shade button. The shade LED indicator light turns green.

 

 

 

 

 

2. Press and hold the Close button on the Pico remote control.

 

3. The shade LED rapidly flashes green. The pairing is complete.

The sections below cover how to set limits on Serena, Triathlon and Palladiom Wire-Free Shades:

  

Section 1: Set the Upper Limit

 

1. Tap the shade button. The shade LED lights up green.

 

 

 

 

 

2. Press and hold the Pico remote’s Open  and Raise buttons at the same time.

 

3. The shade LED rapidly flashes green and then stays lit. Release all buttons.

 

 

 

 

 

 

4. Press the Raise or Lower  buttons on the Pico remote to position the shade to the desired upper limit.

 

 

 

 

 

 

 

 

5. Press and hold the Open  button to set the current shade position as the upper limit.

 

 

 

 

 

 

 

 

6. The shade LED rapidly flashes green. The shade’s upper limit is set.

 

 

 

 

Section 2: Set the Lower Limit

 

1. Tap the shade button. The shade LED lights up green. 

 

2. Press and hold the Pico remote’s Open  and Raise buttons at the same time.

3. The shade LED rapidly flashes green and then stays lit. Release all buttons.

 

 

 

 

 

 

4. Press the Raise  and Lower  buttons on the Pico remote to position the shade at the desired lower limit.

 

 

 

 

 

 

 

 

5. Press and hold the Close  button to set the current shade position as the lower limit.

 

 

 

 

 

 

 

 

6. The shade LED indicator light rapidly flashes green. The shade’s lower limit is set.

 

 

 

  

Section 3: Test the Upper and Lower Limits

 

1. Press the Close  button on the Pico remote. Wait for the shade to move to the fully closed lower limit.

 

 

 

 

 

 

 

 

2. Press the Open  button on the Pico remote. Wait for the shade to move to the fully open upper limit.

Related Articles

 

Click here to learn How to Pair and Reset Shade Limits with a 4-group RF remote.

Click here to learn How to Pair and Reset Shade Limits in the Lutron App.