shades-support

Shades Support

Looking for help? We've got you covered.
Shades Troubleshooting Setting Lutron Shade Limits with...

Explore Knowledge Articles

Back

Setting Lutron Shade Limits with a 4-Group RF Remote

ka0PY00000005yzYAA
000003304

This article details setting limits on your Lutron Serena, Triathlon and Palladiom Wire-free shades using a 4-Group RF Remote Control.

 

This article is expected to take less than 5 minutes to complete.

Knowledge Article Contents:

Before You Begin

1: Set the Upper Limit

2: Set the Lower Limit

3: Test Upper and Lower Limits

Related Articles

Before You Begin

If your shades are already paired to a 4-Group RF Remote Control skip to Section 1: Set the Upper Limit.

If your shades are not paired with a 4-Group RF Remote Control, click here to learn How to Program a Triathlon Shade to a Remote and How to Program a Palladiom Wire-free Shade to a Remote.

Note: See the Related Links if you are using a Pico remote control or setting limits in the app.

 

Diagram of a 4-Group RF Shade Remote Control

 

 

 

 

 

 

 

 

 

 

 

 

Section 1: Set the Upper Limit

 

  1. Tap the shade button. The shade LED indicator light turns green.

Lutron shade LED indicator light illuminated solid green

 

 

 

 

 

  1. Press and hold the Open and Raise buttons simultaneously.

 

4 Group RF Remote Control with Open and Raise Buttons Being Pressed  

 

 

 

 

 

 

  1. The shade LED rapidly flashes green and then stays lit. Release all buttons.

Lutron shade LED indicator light going from flashing to solid green light.

 

 

 

 

 

 

  1. Press the Raise and Lower buttons on the 4-Group remote to position the shade to the desired upper limit.

4 Group RF Remote Control with Raise and Lower Buttons being used to adjust shade limits

 

 

 

 

 

 

 

  1. Press and hold the Open button to set the current shade position as the upper limit.

4 Group RF Remote Control with Open Button Being Pressed to Save Open Shade Limit  

 

 

 

 

 

 

  1. The shade LED rapidly flashes green. The shade’s upper limit is set.

Lutron shade LED indicator light flashing green

 

Section 2: Set the Lower Limit

 

  1. Tap the shade button. The shade LED indicator light turns green.

Lutron shade LED indicator light illuminated solid green

 

 

 

 

 

  1. Press and hold the Open and Raise buttons simultaneously.

4 Group RF Remote Control with Open and Raise Buttons Being Pressed  

 

 

 

 

 

 

 

  1. The shade LED rapidly flashes green and then stays lit. Release all buttons.

Lutron shade LED indicator light going from flashing to solid green light.

 

 

 

 

 

 

  1. Press the Raise and Lower buttons on the 4-Group remote to position the shade to the desired lower limit.

4 Group RF Remote Control with Raise and Lower Buttons Being Used to adjust shade limits

 

 

 

 

 

 

 

  1. Press and hold the Close button to set the current shade position as the lower limit.

4 Group RF Remote Control with Close Button Being Pressed to Save Close Limit

 

 

 

 

 

 

 

  1. The shade LED rapidly flashes green. The shade’s upper limit is set.

Lutron shade LED indicator light flashing green

 

Section 3: Test the Upper and Lower Limits

 

  1. Press the Close button on the 4-Group remote to test the lower limit. Wait for the shade to move to the fully closed lower limit.

Test Close Shade Limit on 4 Group RF Remote by pressing the Close Button

 

 

 

 

 

 

 

 

  1. Press the Open button on the 4-Group remote to test the upper limit. Wait for the shade to move to the fully open upper limit.

Test Open Shade Limit with 4 Group RF Remote Control

 

 

 

 

 

Related Articles

 

Click here to learn How to Pair and Reset Shade Limits with a Pico remote. 

Click here to learn How to Pair and Reset Shade Limits in the Lutron app.