Explore Knowledge Articles
Serena and Triathlon Roller Shade Blink Codes
This article covers the most common blink codes on Lutron Serena and Triathlon Roller Shades.
This article is expected to take less than 5 minutes to complete.
Knowledge Article Contents:
Before You Begin
1: One Red Blink Every Five Seconds = Low Battery
2: Red Indicator Light on for Five Seconds, off for One = Low Battery
3: Fast Red Blinking for 15 Seconds = Remove Obstruction
4: Two Quick Blinks with a Pause (Heartbeat) = Reset Shade Limits
Related Articles
Before You Begin
Now that you have identified your shade type, review the Blink Codes below to begin troubleshooting your roller shade.
The sections below detail the most common blink codes for Serena and Triathlon Roller Shades.
Section 1: One Red Blink Every Five Seconds = Low Battery
This Blink Code means the shade cannot move because the batteries are too low and need to be replaced. Click here to learn How to Change the Batteries in Your Serena and Triathlon Roller Shade.
Section 2: Red Indicator Light On for Five Seconds then Off for One = Low Battery
This Blink Code also indicates the shade's batteries are too low and need to be replaced. Click here for steps on How to Change the Batteries in Your Serena and Triathlon Roller Shade.
Section 3: Fast Red Blinking for 15 seconds = Remove Obstruction
This Blink Code means the shade sensed, or senses, an obstruction. For example, the fabric or hembar is caught up. Click here to learn How to Fix Shade Obstructions in Lutron Roller Shades with our in-depth guide.
Section 4: Double Red Blinks with a Pause (Heartbeat) = Reset Shade Limits
This Blink Code indicates the shade limits need to be reset. Click here to learn How to Reset Shade Limits.
Related Articles
Click here for assistance with Additional Shade Blink Codes and Troubleshooting.