This article details how to change batteries on Lutron Serena and Triathlon battery-powered Roller shades.  

This article is expected to take 5 minutes to complete.

Knowledge Article Contents:

Before You Begin

1: Open the Battery Holder at the top of the Shade

2: Install New Batteries

3: Close the Battery Holder at the top of the Shade

Related Articles

Before You Begin

Lutron recommends using Duracell Alkaline batteries in Lutron battery-operated shade products that require D-cell batteries. We recommend Energizer Lithium-Ion batteries for shade products configured to work with AA-cell batteries.

The sections below will cover how to change the batteries on Serena, Triathlon Roller Shades:

Section 1: Open the Battery Holder at the Top of the Shade 

For shades without optional fascia, rotate the top section of the headrail forward to access the battery compartment.

For shades with optional fascia, pull out and then down on the fascia to access the battery compartment.

Section 2: Install New Batteries

With the battery holder open, insert new 1.5 V D-cell alkaline batteries (quantity and orientation are listed on the battery holder). Do not mix brands or types. Lutron recommends Duracell.

Shades with the Battery Boost option contains (2) battery holders. To achieve extended battery life, install new batteries in both battery holders. 

Section 3: Close the Battery Holder at the Top of the Shade

Return the fascia or battery compartment to its closed position by rotating upward locking it in place.

Related Articles

Click here for more assistance with Lutron Shade Blink Codes and Troubleshooting.