This article covers the most common blink codes on Lutron Triathlon Configured Roman Kits. 

This article is expected to take less than 5 minutes to complete.

Knowledge Article Contents:

Before You Begin

1: One Red Blink Every Five Seconds = Low Battery

2: Red Indicator Light on for Five Seconds, off for One = Low Battery

3: Fast Red Blinking for 15 Seconds = Remove Obstruction

4. Two Quick Blinks with a Pause (Heartbeat) = Reset Shade Limits

5. Solid Green for 3 seconds, off for 1 second = Spring Validation Test Passed

6. Flashing Green On/Off followed by Solid green for 3 seconds = Spring Validation Test Failed (Undersprung)

7. Flashing Red On/Off followed by Solid red for 3 seconds = Spring Validation Test Failed (Oversprung)

Related Articles

Before You Begin

Now that you have identified your shade type, review the Blink Codes below to begin troubleshooting your Serena/Triathlon Configured Roman Shade Kits.  

The sections below detail the most common blink codes for Triathlon Configured Roman Shade Kits.

Section 1: One Red Blink Every Five Seconds = Low Battery

This Blink Code means the shade cannot move because the batteries are too low and need to be replaced. Click here to learn How to Change the Batteries in Your Triathlon Configured Roman Shade Kit. 

Section 2: Red Indicator Light On for Five Seconds then Off for One = Low Battery

This Blink Code also indicates the shade's batteries are too low and need to be replaced. Click here for steps on How to Change the Batteries in Your Triathlon Configured Roman Shade Kit. 

Section 3: Fast Red Blinking for 15 seconds = Remove Obstruction

This Blink Code means the shade sensed, or senses, an obstruction. For example, the fabric or strings are caught up. Click here to learn How to Fix Shade Obstructions in Lutron Triathlon Configured Roman Shade Kit with our in-depth guide. 

Section 4: Double Red Blinks with a Pause (Heartbeat) = Reset Shade Limits

This Blink Code indicates the shade limits need to be reset. Click here to learn How to Reset Shade Limits. 

Section 5: Solid green for 3 seconds, off for 1 second = Spring Validation Test Passed

This Blink Code indicates the shade limits need to be reset. Click here to learn How to Reset Shade Limits. 

Section 6: Flashing Green On/Off followed by Solid green for 3 seconds = Spring Validation Test Failed (Undersprung)

This Blink Code indicates the shade doesn't have enough spring modules and is undersprung. Click here to learn How to Balance the Springs in your Triathlon Configured Roman Shade Kit. 

Section 7: Flashing Red On/Off followed by Solid red for 3 seconds = Spring Validation Test Failed (Oversprung)

This Blink Code indicates that too many spring modules have been added to the shade and it is oversprung. Click here to learn How to Balance your Triathlon Configured Roman Shade Kit. 

Related Articles

Click here for assistance with Additional Shade Blink Codes and Troubleshooting.