Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
If you don't know your model number, try browsing for it here
-
MyRoom
-
Sivoia QS Configurable Power Panel, 10 Output
-
0-10 V/ Switching Power Module (CE) - DIN-rail (LQSE-4T10-D)
-
3" Fascia and Top-Back Cover Spec Submittal
-
30-Output Configurable Power Panel Enclosure (Power Modules sold separately), 35V Output
-
300 W/300 VA Lamp Dimmer (HQR-3LD)
-
Alice Interface software license (per room) (LRM-ALICE-PR)
-
Amadeaus HotSoS Interface software license (per room) (LMR-HOTSOS-PR)
-
Architectural RF seeTouch keypad, insert, dual 3-button with Raise/Lower, 434 MHz (HQRA-W3BD)
-
Assa Abloy Vingcard Integration License (per room) (LMR-VINGCARD-PR)
-
C5-BMF-2A BALLAST MODULE SPEC
-
Cable-Guided Insulating Honeycomb Shades
-
Corridor Pico control (QSWP-CP-)
-
DALI Power Module (CE/cUL/NOM) - DIN-rail (LQSE-2DAL-D)
-
Dual Technology Ceiling Mount Sensor - Specification Submittal
-
Dual Technology Wall Mount Occupancy Sensor - Specification Submittal