Explore Knowledge Articles
![MaestroSupport_02](/sites/default/files/2022-09/MaestroSupport_02_0.jpg)
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
![find model number](https://www.lutron.com/PublishingImages/Support/How-find-model-number_01.jpg)
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
![find model number](https://www.lutron.com/PublishingImages/Support/FindNumber.jpg)
- Browse Components
-
Applied Filter: Dimmers > Electronic Low Voltage > MSCELV-600M
If you don't know your model number, try browsing for it here
- LED / CFL
- Incandescent / Halogen
- Magnetic Low Voltage
- Electronic Low Voltage
- Fluorescent / LED 3-Wire
- Companion
LED / CFLIncandescent / HalogenMagnetic Low VoltageElectronic Low VoltageFluorescent / LED 3-WireCompanionDimmer-FanDimmer-SwitchDimmer-TimerDimmerDual CircuitDual TechDual Tech Dual CircuitSwitch -
View support resources for the full range of Maestro designer light controls, fan controls, sensors and timers
![Loading...](/themes/custom/lutron/images/ajax_loader.gif)
![Loading...](/themes/custom/lutron/images/ajax_loader.gif)
- Can I use two of these in a 3-way application?
-
Do I need a companion dimmer for multi-location dimming and switching?
Not always, as it depends on the model number. Some products, such as the Maestro C·L dimmer, will work with a standard mechnical switch in a 3-way application. Other models may require a master and a companion device. Note: In a 4-way application, companion devices are always required.
- In a multi-location application, can I place the master dimmer in any location?
- When installing a master and companion dimmers, does it matter where I put the master?
![Loading...](/themes/custom/lutron/images/ajax_loader.gif)
![Loading...](/themes/custom/lutron/images/ajax_loader.gif)
Looking for other products?
No Results Found! Please enter valid model number to search.
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
![find model number](/sites/default/files/2022-08/How-find-model-number_01.jpg)
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
![find model number](/sites/default/files/2022-08/FindNumber.jpg)