Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.

No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.

- Browse Components
-
Applied Filter: Control Interfaces
If you don't know your model number, try browsing for it here
QSM2-*Pico WiredQSWAS-*QSWS2-*PHPM-*AccessoriesPico WirelessAccessoriesCeiling MountWall Mount -
GRAFIK Eye QS
- Documents
- FAQs
- Videos

-
IO Install Guide
-
IR Partition Sensor
-
Lutron QS Integration Protocols
-
QS Ethernet & RS232 Control Interface
-
QS Motor Group Controller (Programming Guide) Spec
-
QS Motor Module Spec Submittal
-
QSE-CI-DMX Install Guide
-
QSE-IO Install Guide
-
QSE-IO Programming Instructions


