Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
If you don't know your model number, try browsing for it here
-
GRAFIK Eye QS
-
#017 - Common Neutral Interaction
-
#109 - A Guide to Using Dimmable Receptacles
-
#426 - Installation of Radio Powr Savr Daylight Sensor on Pendant Fixtures
-
#432 - Warehouse aisle wireless sensors
-
#441 - Using Lutron Systems to Control Smart Breakers
-
#442 - Application Note for Current Sink Only Controls
-
#487 - Minimum and Maximum loads for LED and CFL lamps/fixtures
-
#519 - Minimizing Radio Frequency Interface
-
#529: Lutron 0-10 V- Wallbox Controls with a Power Pack and Wired Occupancy Sensor
-
#533 - Vacancy Solution with Lutron Wired Occupancy Sensors, PP-DV Series Power Packs, and Nova T* Low-Voltage Momentary Switches
-
#559 - Dimming Low-Voltage LED MR16 Lamps
-
#579 - Color Tuning with Lutron Controls
-
#587 – 0-10 V Control Topology
-
#592 - Lutron Solutions for DMX512-A
-
#600 - Using Wired Sensors with Wireless Systems Through the Use of a WLCU301-CPN6814