
Explore Knowledge Articles
Back
What Tools Do I Need To Install My Shades?
What Tools Do I Need to Install My Lutron Roller Shades?
To successfully install your shades you will need the following tools:
- Power Drill/Driver
- Pencil
- Level
- T20 Torx driver 4 in. or longer extension recommended.
- Tape Measure
- D-Cell Sized Alkaline Batteries
- 1/8 in. drill bit for screw pilot holes into structure (optional)
Installation Specific Requirements
Outside Mount Above Trim - either a (a) Phillips #2 or (b) 1/4 in hex drive with 4 in. or longer extension for provided screws
Jamb Mounting - (a) 3/16 in drill bit to drill out bracket, appropriate (b) 2 in. #8 flat head screws (not provided) and relevant drive
Was this article helpful?
Thank you! We appreciate your feedback!