
Soporte RadioRA 3
Lutron vuelve a subir el nivel. Con 10 años de desarrollo, RadioRA 3 es un nuevo sistema revolucionario que promete transformar la manera en la que sus clientes residenciales perciben el control de iluminación.
Conozca másObtenga ayuda
¿Cómo encuentro mi número de modelo?
¿Tiene el empaque original?
-
Si el producto venía en empaque plástico (uno bivalvo), encontrará el número de modelo al frente de la tarjeta de plantilla, en la esquina inferior izquierda. Si su producto venía en caja, encontrará el número de modelo en la parte superior de la caja.
La mayoría de los números de modelo tienen entre 12 y 16 caracteres e inician con un par de letras seguidas por un guion.

¿No tiene el empaque? ¡No hay problema!
-
El número de producto está en una etiqueta en el lado del atenuador o interruptor.*
Si ya instaló el atenuador/interruptor, corte la electricidad y luego quite la placa de pared. Desatornille y retire el adaptador de placa de pared y luego desatornille el atenuador/interruptor y sáquelo de la pared hasta que pueda ver la etiqueta.
*Tenga en cuenta: El número de producto de los atenuadores Ariadni/Toggler no está en la etiqueta. Está ubicado directamente en el frente del atenuador, en la parte superior izquierda, o justo debajo del pivote de encendido/apagado.

- Explorar componentes
-
Si no conoce su número de modelo, intente buscarlo explorando aquí
Si no conoce su número de modelo, intente buscarlo explorando aquí
- Marco de 6 puertos
- Conector BNC
- Conector de TV por cable
- Conector de fibra
- Puerto de red
- Conector de teléfono
- Puerto telefónico
Marco de 6 puertosConector BNCConector de TV por cableConector de fibraPuerto de redConector de teléfonoPuerto telefónicoAtenuadores MaestroAtenuador de enchufeMódulo de atenuación RFAtenuadores SunnataAccesoriosPico WirelessTeclados seeTouchTeclados SunnataTeclados de mesaMódulo de energía fluorescenteMódulo de energía de fase adaptableMódulo interruptor de energíaProcesador RadioRA 3Receptáculos de 15 AReceptáculos de 20 ASensores de techoSensores de esquinaSensores de pasilloAccesorios de montajeSensores de paredAccesoriosInterruptores MaestroMódulo de relé RFInterruptores Sunnata -
RadioRA 3


-
Can I get my Pico paddle remote to dim?
No, The Pico paddle remote works the same as the Pico 2B smart remote. The only exception is that when paired with a Diva Dimmer a single press of the Pico Paddle Remote will take the light level to the slider level of the dimmer, a second press takes the dimmer to high end. (A firmware update may be required to your Diva smart dimmer through the Lutron App)
- Can the firmware update be done in pro mode?
- Can the Pico paddle remote be used to control scenes?
- Can you set the light on the Pico paddle remote as a night light?
- Do I need a Caséta smart hub to use a Pico paddle remote?
- Does the Pico paddle remote work with other Pico accessories such as the Pico pedestal and the Car Visor Clip?
-
How can I tell if the firmware of my Diva smart dimmers needs to be updated?
In your app, go to settings. In the menu options, you should see an option for Firmware Update. If there is a red dot next to Firmware update, this means you have devices that require an update. Select Firmware update. The next screen will show devices that require a firmware update. If none are listed, then your devices connected to your Lutron smart hub are currently up to date.
-
How do I change the battery on Pico paddle remote?
To learn how to replace the battery in for all Pico smart remotes. Click here.
Warning: When the Pico smart remote is open for battery replacement, the battery and lightpipe might present a choking hazard or cause other injury to small children. Keep these items away from small children. - I just paired a Pico Paddle Remote to a previously installed Diva Digital Dimmer and when I press the paddle remote the light goes to full on rather than the slider level. What should I do?
-
If my Pico paddle remote is added to a Caséta smart lighting control system with a smart hub and the smart hub loses power, will my Pico paddle remote still work?
A smart hub is not required for the Pico paddle remote to work; however, you can add it to a Caséta smart hub. Once a Pico paddle remote has been added to a Caséta system, the Pico paddle remote does not require internet, but it does require power to the smart hub.
-
What happens if the Pico paddle remote is paired with a Diva smart diva and an Original Caséta dimmer?
If both lights are off, with one tap the lights connected to the Diva smart dimmer will go to the level indicated on the slider and the lights connected to the original dimmer will go to 100%. A second tap will bring the lights on the Diva smart dimmer to 100%. If the lights on the Diva smart dimmer are already on, then the lights will go to 100%.
-
What happens if the Pico paddle remote is paired with multiple Diva smart dimmers?
If the Diva smart dimmers are in the off position, a single tap will set the lights of each dimmer to the levels indicated on their respective sliders. A second tap will turn all connected dimmers to 100%.
- What if I don’t see the firmware update in my app?
- What systems does the Pico paddle remote work with?
-
When the Pico paddle remote is paired with a Diva smart dimmer, what are the extra control features?
Exclusive when paired with the Diva smart dimmer, the Pico paddle remote will allow you to return to the slider level with one tap of the on button with a second tap of the on button taking you to 100% brightness. (A firmware update may be required to your Diva smart dimmer through the Lutron App)

