Explore Quick Installation Guides
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
View support resources for the full range of Skylark Contour dimmers and fan controls
-
Can I control more than one fan from this unit?
Skylark Contour fan controls are only rated to handle one paddle fan per control. To control more than one fan from a single source you'll need a fully variable model, such as the Skylark model SFS-5E. However, please ensure your fan is rated to be used with solid-state controls for this option.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Can I use this if my fan already has pull chains to change the speed?
Yes, however you'll need to keep the pull chains on the highest speed for the control to work.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Is this fan control solid-state?
These controls are not solid-state. Only our fully variable controls are classified as solid-state, such as the Skylark model SFS-5E.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Will this work on a fan that has a DC motor?
Unfortunately this control will not work with fans that use a DC motor.
Was this FAQ helpful?Thank you! We appreciate your feedback!
