Explore Quick Installation Guides
Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
View support resources for the full range of Skylark Contour dimmers and fan controls
-
Can I use any dimmable LED+ or LED with a Lutron LED+ dimmer?
We can only recommend dimmable CFL and LED bulbs that we have tested (per UL) and deemed compatible with our dimmers. Please use our LED Compatibility Tool to ensure you're using a bulb that is approved for this dimmer. If the bulb you are using does not appear on the approved list, please contact the LED manufacturer for a dimmer recommendation.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Can I use more than one dimmer in a 3-way to dim from both sides of the room?
You can use only one Skylark Contour dimmer in a 3-way. In the other location you'll need to use a standard mechanical switch, such as model CA-3PS or CA-4PS. To dim from both locations you'll need to use Maestro dimmers (a master and a companion dimmer).
Was this FAQ helpful?Thank you! We appreciate your feedback!
