This article details changing batteries on your Lutron Serena and Triathlon battery-powered Wood Blinds. 

This article is expected to take less than 5 minutes to complete.

Knowledge Article Contents:

Before You Begin

1: Access the Top of the Headrail

2: Install New Batteries

3: Reinstall the Shade into Brackets (if necessary)

Related Articles

Before You Begin

Lutron recommends using Duracell Alkaline batteries in Lutron battery-operated shade products that require D-cell batteries. Lutron recommends Energizer Lithium-Ion batteries for shade products configured to work with AA-cell batteries.

For optimal battery life, install new batteries. Do not mix old and new batteries. Do not install carbon-zinc or rechargeable batteries and do not mix battery types.

The sections below cover how to change the batteries on Serena and Triathlon Wood Blinds.

Section 1: Access the Top of the Headrail

If the shade is Outside Mounted the batteries are accessible at the top of the headrail. If the shade is Inside Mounted, the shade will need to be removed from the brackets to access the battery compartment in the top of the headrail.

Click here to review the Serena and Triathlon Wood Blinds Installation Manual for instructions on how to operate brackets.

Section 2: Install New Batteries

Install the batteries only as indicated in the battery holders on the front of the headrail. The shade button will flash red/green 3 times when the blind is powered.

Installing AA Batteries in Lutron Wood Blinds

Installing D Batteries in Lutron Wood Blinds

Section 3: Reinstall the Shade into Brackets 

If you removed your battery-powered wood blind from the brackets to replace batteries, reinstall them and make sure the brackets have been secured. 

Related Articles

Click here for more assistance with Lutron Shade Blink Codes and Troubleshooting.