Skip to main content
RadioRA 3 System Design & Setup Ra2 device compatibility

Explore Knowledge Articles

Ra2 device compatibility

ka0PY0000002qybYAA
000003766

RadioRA 2 Device Compatibility

In this article we'll overview what devices are compatible with RadioRA 3 systems when converting from a RadioRA 2 system, as well as solutions for devices not compatible.


Article Contents:

  1. Compatible Devices
  2. Incompatible devices and their solutions
  3. Related Articles

Compatible Devices from RadioRA 2 to RadioRA 3

These devices are fully compatible with RadioRA 3. (Click to Expand)

Auxiliary Repeater, Wireless Repeater, Visor Control Receiver

Maestro Dimmers, Switches, and Fan Controls (All models), Seetouch Hybrid and Non-Hybrid Wall-mounted Keypads (all Models), SeeTouch Tabletop Keypads

All Pico Wireless Controls and Radio Power Savr Wireless Sensors (Ceiling and Wall-mount)

Plug-in Lamp dimmer, Plug-in Dimming Module, and Plug-in Switching Module

LMJ RF Modules, Lutron Wireless Thermostat, and Sivoia QS/QS Triathalon Shades

Wallbox Power Modules with Designer 23.7 or higher


For additional RadioRA 3 compatible components and model numbers, click here .


Incompatible Devices in RadioRA 3

The following devices are incompatible with RadioRA 3. Each device will have it's recommended replacement for similar functionality. (Click to Expand)

RadioRa 2 Main Repeater and Connect Bridge. Upgrade is the RadioRa 3 Processor.

Grafik T Dimmers and Switches (all models). Upgrade to Sunnata or Maestro Dimmers and Switches

Grafik T CL Hybrid Keypad (All Models). Upgrade to Sunnata or Seetouch Hybrid Keypad

Single Zone HVAC Controller, Lutron Wireless TouchPro Thermostat, Seetemp Controllers. Upgrade to Lutron Wireless Thermostat

 


Related Articles

For more information on Converting a RadioRA 2 system to RadioRA 3, please see our Converting RA2 System to a RA3 System article