hero_radiora3_tab

RadioRA 3

Looking for help? We've got you covered
RadioRA 3 Programming Lumaris Tape Light Programming Overview

Explore Knowledge Articles

Back

Lumaris Tape Light Programming Overview

Lumaris Tunable White Tape Light Programming

In this article, we'll overview how to add the Lumaris tape light to your project, and how to enable it's Day/Night and Natural Show feature.

Contents

How to Add Lumaris to Your Project

In RadioRA 3, there will be a menu in Design Tab called Smart Lights.
  1. Select the Design Tab's drop down and select Smart Lights.

Smart Lights, a new option, in the Design tab

  1. In the new menu, select the room you want to add the Lumaris to and select Add Zone.

The Add Zone button when a room is selected

  1. In the Product Type column, you can now select if it's a Soft White or Daylight Lumaris.

Showing the options for Lumaris tape light types in the room after being added.

  1. In this table you may also change the Zone Name, Power On Level (if power loss occurs), and what Processor the Lumaris is assigned to.
  2. Proceed to How to Enable Day/Night in RadioRA 3.

 

 

 

In Homeworks QSX we will use the Loads option in the Design Tab:
  1. Select Loads from the Design Tab.

The Loads option in the Design Tab

  1. Select the room you want to add the Lumaris to, then ensure the drop-down menu next to 'Add Zone' has Lumaris selected

Lumaris as a Load Type in the Loads menu

  1. In the Product Type column, select the type of Tape Light (Soft White or Daylight)

Drop down menu to select your Lumaris tape light type.

  1. Proceed to How to Enable Natural Show.

 

 

How to Enable Day/Night Mode (Ra3)

RadioRA 3's Day/Night Mode will not appear until a Lumaris Tape light is added to the project.
  1. Select Tools > Project Settings.

The Project Settings option in the Tools menu

  1. Select Day/Night Mode tab.

The new Day/Night Mode tab that will only appear when a Lumaris is added to a project.

    • Here you can adjust what the Smart Lights will do when the Day/Night Mode is enabled, and adjust when the system recognizes to switch between Day and Night

The adjustable settings in the Day/Night Mode tab, including start time, intensity, and temperature . 

  1. Now you can program a keypad button to activate the Day/Night mode within the program tab

Programming a Lumaris to a keypad button with the Day/Night Mode selected in the bottom right corner.

 

 

How to Enable Natural Show (QSX)

Natural Show for Lumaris is programmed exactly like Ketra's Natural Show:
  1. Go to Program > Natural Show

Natural Show in the Programming Tab drop-down menu

  1. Select Add Natural Show at the bottom left

Add Natural Show option in the bottom left corner

    • For more information on how to adjust a Natural Show's settings, please see our Natural Show Article (Coming Soon)
  1. Now you can program a keypad button to activate the Natural Show within the program tab.

Programming a keypad button and selecting the Shows tab to select the Natural Show.

 

 

Related Articles

For a video walkthrough of the programming on RadioRA, please see our Lumaris Programming Walkthrough (OVW 822) on our LCI.

  • This will require a myLutron account with RadioRA 3 training to view.

For more information on the Lumaris tape light, please see the Lumaris Tape Light Overview.

Having issues? See our Lumaris Tape Light Troubleshooting Guide.