Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
RA2 Select
-
What programming options are available with the RRD-PRO?
With this dimmer, you are able to adjust:
- High and Low End Trim
- Enable/Disable Indicator Lights
- Fade On/Off rates
- Delayed Fade to Off Time
- Preset Light Level
- Dimming Phase
For RadioRA 2, use the system programming software to set up the system (training is required to access the software).
For RA2 Select, download the Lutron App from the App Store or Google Play Store, open the App and follow the instructions to setup the system.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Where can I go for additional wiring help?
You will be able to find a video, diagram, and a step-by-step walk through for this product on Lutron’s Wiring Wizard.
Was this FAQ helpful?Thank you! We appreciate your feedback!