Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
Quantum
-
Can I use these wired sensors as vacancy sensors?
Yes, with the correct low voltage momentary switch and the correct power pack, you can set these sensors to be vacancy only. For more information, please view Application Note 533.
Was this FAQ helpful?Thank you! We appreciate your feedback! -
Can I wire the sensor to a power pack along with a 0-10V dimmer?
You can do this, however, it is important to note that if the switch is in the OFF position, the occupancy sensor will not be able to turn the lights on automatically. For more information on this setup, check out our short description on Application Note.
Was this FAQ helpful?Thank you! We appreciate your feedback!