Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
If you don't know your model number, try browsing for it here
-
MyRoom
-
4-Group RF Remote Control
-
Angled Coupled Shade - Measuring Template Instructions
-
Angled Coupler - Light Gap Reference Guide 2.5" tube
-
Angled Coupler Roller Shade Chassis Addendum - Installation Guide
-
Angled Coupler WIDR Tube - Light Gap Reference Guide
-
Cable Guided Roller Shade (Turnbuckle Design) Installation Instructions
-
Cable Guided Roller Shade (Upper Mounting Bracket Design) Installation Instructions
-
Clerestory Roller Shade – Ceiling-Mount - LS1
-
Cordless Manual Roller Shade - Installation Guide
-
Coupled Shades - ROLLER 100 / 150 / 300 - Installation Instructions
-
Kirbe Drapery - Vertical Drapery Chassis - Installation Guide
-
QS Link Plug-In Power Supply, NEMA 5-15 plug, 120 V – 240 V Input, 35 V Output
-
QS Power Supply J-Box Mount Install Guide
-
QS Wireless Power Supply Wiring Guidelines