Explore Knowledge Articles
test
HomeWorks
For the most uncompromising home integration projects. Equip yourself and your team with the ultimate in design freedom, innovative technology, and reliable quality with HomeWorks.
Learn MoreGet help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
Applied Filter: Plug in Module > HQR-15OUT
If you don't know your model number, try browsing for it here
QSM2-*- 0-10V
- Companion
- Electronic Low Voltage
- Fluorescent / LED 3-Wire
- Fluorescent 2-Wire
- Hi-Lume LED 2-Wire
- Incandescent / Halogen
- LED / CFL
- Magnetic Low Voltage
0-10VCompanionElectronic Low VoltageFluorescent / LED 3-WireFluorescent 2-WireHi-Lume LED 2-WireIncandescent / HalogenLED / CFLMagnetic Low Voltage- GRX-PWM
- GRX-TVI
- LQSE-1DAL2-D
- LQSE-2HDC-D
- LQSE-4A1-D
- LQSE-4A5-120-D
- LQSE-4M-120-D
- LQSE-4S8-120-D
- LQSE-4T20-120-D
- LQSE-4T5-120-D
- PHPM-*
PHPM-*- HQR-T*
- HQRA-HN*
- HQRA-W*
- HQRD-HN*
- HQRD-W*
- HQRT-GH*
- HQWA-KP*
- HQWA-W*
- HQWAS-*
- HQWD-W*
- HQWT-S*
- HQWT-U*
- HRST-HN
- HRST-W
- HW-NW-KP*
HQR-T*HQRA-HN*HQRA-W*HQRD-HN*HQRD-W*HQRT-GH*HQWA-KP*- HQWA-W1BI
- HQWA-W1BN
- HQWA-W1RLDI
- HQWA-W1RLDN
- HQWA-W2BSI
- HQWA-W2BSN
- HQWA-W2RLDI
- HQWA-W2RLDN
- HQWA-W3BDI
- HQWA-W3BDN
- HQWA-W3BSI
- HQWA-W3BSN
- HQWA-W3BSRLI
- HQWA-W3BSRLN
- HQWA-W4BSI
- HQWA-W4BSN
- HQWA-W4SI
- HQWA-W4SN
- HQWA-W5BI
- HQWA-W5BIRI
- HQWA-W5BIRN
- HQWA-W5BN
- HQWA-W5BRLI
- HQWA-W5BRLN
- HQWA-W6BI
- HQWA-W6BN
- HQWA-W6BRLI
- HQWA-W6BRLN
- HQWA-W7BI
- HQWA-W7BN
HQWA-W*HQWAS-*HQWD-W*HQWT-S*HQWT-U*HW-NW-KP*- Accessories
- HQ-LV21-120
- HWR-PD-8-120FT
- L-LV14-120
- PD10-65T-DV
- PD2*
- PD4*
- PD5-36F-120
- PD6-42T-DV
- PD8-*
- PD9-59F-120
AccessoriesPD2*PD4*PD8-*AccessoriesPico WirelessAccessoriesCeiling MountMullion MountWall MountWindow MountCompanionMaster -
HomeWorks
-
How many Panel Link to QS Link Translators do I need for my upgrade project?
You need (1) Panel Link to QS Link Translator to replace each Module Interface (MI) or Specification Grade Panel Interface (SPI) in any panel that you are retaining in the process of upgrading the rest of the system to HomeWorks QSX.
- How many sensors can I run off of a 24V power pack?
-
In legacy systems like Interactive, Illumination and QS, RPMs communicated on a dedicated link. When using the Translator, does this tie up an entire link on the QSX processor for dedicated control of RPM modules?
No, a dedicated link will no longer be required when using the Translator to allow these legacy devices to talk to the QSX system. The Translator allows the RPMs and Specification Grade cards to communicate into the QS link.
-
Is this Z-Wave or Zigbee compatible?
Neither. These devices use highly reliable Clear Connect RF technology. To learn more check out our White Paper on the many advantages of Clear Connect RF.
- What dimmer do I use with this?
- What dimmer do I use with this?
- What dimmer do I use with this?
- What dimmer do I use with this?
- What power module can be used with this?
-
What systems is this device compatible with?
Pico remotes will work with a wide range of systems and products that utilize RF technology such as Caseta Wireless or RA2 Select, and various commercial systems. Refer to the specification submittal for a full list of compatible controls.
- What Remote Power Module (RPM) Panels does this subplate fit into?
- What model number sensors are supported?
Looking for other products?
No Results Found! Please enter valid model number to search.
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
