Explore Knowledge Articles
test
HomeWorks
For the most uncompromising home integration projects. Equip yourself and your team with the ultimate in design freedom, innovative technology, and reliable quality with HomeWorks.
Learn MoreGet help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
- Browse Components
-
Applied Filter: Interfaces and DIN Modules
If you don't know your model number, try browsing for it here
QSM2-*- 0-10V
- Companion
- Electronic Low Voltage
- Fluorescent / LED 3-Wire
- Fluorescent 2-Wire
- Hi-Lume LED 2-Wire
- Incandescent / Halogen
- LED / CFL
- Magnetic Low Voltage
0-10VCompanionElectronic Low VoltageFluorescent / LED 3-WireFluorescent 2-WireHi-Lume LED 2-WireIncandescent / HalogenLED / CFLMagnetic Low Voltage- GRX-PWM
- GRX-TVI
- LQSE-1DAL2-D
- LQSE-2HDC-D
- LQSE-4A1-D
- LQSE-4A5-120-D
- LQSE-4M-120-D
- LQSE-4S8-120-D
- LQSE-4T20-120-D
- LQSE-4T5-120-D
- PHPM-*
PHPM-*- HQR-T*
- HQRA-HN*
- HQRA-W*
- HQRD-HN*
- HQRD-W*
- HQRT-GH*
- HQWA-KP*
- HQWA-W*
- HQWAS-*
- HQWD-W*
- HQWT-S*
- HQWT-U*
- HRST-HN
- HRST-W
- HW-NW-KP*
HQR-T*HQRA-HN*HQRA-W*HQRD-HN*HQRD-W*HQRT-GH*HQWA-KP*- HQWA-W1BI
- HQWA-W1BN
- HQWA-W1RLDI
- HQWA-W1RLDN
- HQWA-W2BSI
- HQWA-W2BSN
- HQWA-W2RLDI
- HQWA-W2RLDN
- HQWA-W3BDI
- HQWA-W3BDN
- HQWA-W3BSI
- HQWA-W3BSN
- HQWA-W3BSRLI
- HQWA-W3BSRLN
- HQWA-W4BSI
- HQWA-W4BSN
- HQWA-W4SI
- HQWA-W4SN
- HQWA-W5BI
- HQWA-W5BIRI
- HQWA-W5BIRN
- HQWA-W5BN
- HQWA-W5BRLI
- HQWA-W5BRLN
- HQWA-W6BI
- HQWA-W6BN
- HQWA-W6BRLI
- HQWA-W6BRLN
- HQWA-W7BI
- HQWA-W7BN
HQWA-W*HQWAS-*HQWD-W*HQWT-S*HQWT-U*HW-NW-KP*- Accessories
- HQ-LV21-120
- HWR-PD-8-120FT
- L-LV14-120
- PD10-65T-DV
- PD2*
- PD4*
- PD5-36F-120
- PD6-42T-DV
- PD8-*
- PD9-59F-120
AccessoriesPD2*PD4*PD8-*AccessoriesPico WirelessAccessoriesCeiling MountMullion MountWall MountWindow MountCompanionMaster -
HomeWorks
- Documents
- FAQs
- Videos
-
#017 - Common Neutral Interaction
-
#097 - Lightning/Surge Protection for RadioRA 2, HomeWorks QS, and HomeWorks Devices
-
#109 - A Guide to Using Dimmable Receptacles
-
#442 - Application Note for Current Sink Only Controls
-
#466 - Mounting Guidelines for Lutron’s DIN Rail Products
-
#482 - Lutron Qualified DALI Ballasts
-
#487 - Minimum and Maximum loads for LED and CFL lamps/fixtures
-
#516 - Phase Adaptive Control From a 0-10 V Controller
-
#519 - Minimizing Radio Frequency Interface 360484
-
#559 - Dimming Low-Voltage LED MR16 Lamps
-
#579 - Color Tuning with Lutron Controls
-
#587 – 0-10 V Control Topology
-
#622 - Finire 3” Design Guide
-
#637 - NEMA SSL 7A DIMMER COMPLIANCE LIST Including Compliance With CA TITLE 24
-
#658 - Programming Residential Systems with Lutron LED Drivers
Looking for other products?
No Results Found! Please enter valid model number to search.
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.
No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.
