Explore Knowledge Articles

Introducing RadioRA 3
Lutron raises the bar once again. 10 years in the making, RadioRA 3 is a new, game-changing system that promises to transform the way your residential clients look at lighting control.
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.

No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.

Get help your way
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.

No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.

- Browse Components
-
Applied Filter: Wallplates > Metal Finish
If you don't know your model number, try browsing for it here
Individual Plug-In Power SupplyVierti Wallplate KitWireless Processor Mounting AdapterIn-Line Load ControlsRF Relay ModulePlug In Lamp DimmerRF Dimming ModuleCCO ModuleAccessoriesVierti Button KitVierti KeypadsPico WirelessTable Top KeypadsPhase Adaptive Power ModuleRadioRA 3 ProcessorCeiling SensorsCorner SensorsHallway SensorsMounting AccessoriesWall Sensors -
RadioRA 3

-
RF Lamp Dimmer - Installation Guide
-
Sunnata RF Dimmers - Installation Guide
-
Pico Wireless Control - Installation Guide
-
Pico Wireless Control, 4 Button - Installation Guide
-
How to Become an Installer
-
Sunnata RF Switch - Installation Guide
-
Lumaris Power Interface
-
Lumaris RGB + Tunable White Tape Light
-
RF CCO Module - Installation Guide
-
RF Dimming Module - Installation Guide
-
RF Relay Module - Installation Guide
-
Power Modules - Installation Instructions
-
Wireless Ceiling Mounted Occupancy/Vacancy Sensors - Installation Guide
-
Wireless Wall-Mounted Occupancy/Vacancy Sensors - Installation Guide


