Sunnata PRO Dimmers & Switches for RadioRA 3 System

Model Numbers

RRST-PRO-N-__ (Color) DIMMER
RRST-8ANS-__ (Color) SWITCH

Knowledge Article Contents:

Verifying Your Application
Specifications
Product Installation
Troubleshooting

The Sunnata PRO dimmer and switch require a neutral connection. Please verify the availability of a neutral connection prior to specification / installation of the product.

US houses built from the mid 1980's typically have a neutral (white) wire in the switch box. The neutral (white) wires are typically tied together with a wirenut. Here is a picture of a typical switch box that contains neutral connections:

A close-up of a wall box with 3-way wiring and a neutral connection

RadioRA 3 Sunnata PRO Dimmer & Switch Specifications

MODEL	VOLTAGE/PHASE	NEUTRAL CONNECTION REQUIRED	LOAD TYPE	MINIMUM LOAD	MAXIMUM LOAD*	REQ PHASE MODE
RRST-8ANS SWITCH	120V	YES	INC/HALOGEN	10 W	8 A
			LED	1 BULB	8 A
			ELV	10 W	8 A
			MLV	10 VA	8 A

RRST-PRO-N DIMMER	120V FORWARD OR REVERSE PHASE	YES	INC/HALOGEN	10 W	500 W	Either
			LED	1 BULB	250 W	Either
			MLV HALOGEN	10 W	400 VA	Forward
			ELV HALOGEN	10 W	500 W	Reverse
			MLV MR16 LED	SEE APP NOTE #559		Forward
			ELV MR16 LED	SEE APP NOTE #559		Reverse

Product Installation

Important notes:

RadioRA 3 Sunnata dimmers and switches require a neutral connection.
RadioRA 3 Sunnata dimmers and switches must be installed on the load side of a 3-way or multilocation application.

Sunnata PRO 3-way correct and incorrect wiring diagrams

		WIRING DIAGRAM	WALK ME THRU INSTALL
RRST-PRO-N DIMMER RRST-8ANS SWITCH	1 Location
RRST-PRO-N DIMMER RRST-8ANS SWITCH	2 or more locations

Troubleshooting

For detailed blink code assistance, visit the "Sunnata Blink Codes" article.

RadioRA 3

¿Buscando ayuda? Nosotros le respaldamos

Explore Knowledge Articles

Sunnata PRO Dimmers & Switches for RadioRA 3 System