Explore Knowledge Articles
Back
Restoring a Sivoia QS Shade to Factory Default
How to Restore Your Lutron Roller Shades to Factory Default
Restoring your shade to its factory default settings removes all control and system assignments. Shade limits are not affected.
Restoring Your Shade to Factory Default Settings
Press and hold the four drive buttons in the following timed sequence:
|
1.Press and hold the Close Limit button until the drive LED starts to flash green. | |
| 2. While the Drive LED is flashing from the previous step - Press and hold the Open Limit button until the drive LED starts to flash green. | |
| 3. While the Drive LED is flashing from the previous step - Press and hold the CW Arrow button until the drive LED starts to flash green. | |
| 4. While the Drive LED is flashing from the previous step - Press and hold the CCW Arrow button until the drive LED starts to flash green. |
If completed correctly, the Drive LED will immediately turn blue/red and then flash the multi-color "Power up" Sequence before turning off to indicate that the shade has been reset to factory default settings.
Notes:
- If the green LED stops flashing / times out at any point during this process, or if unspecified button presses occur, this process must be restarted, with the drive in a state where the green LED is off.
- The "Press and hold" period takes between 3-5 seconds
- The green LED will flash for 1-2 seconds following each step
Was this article helpful?
Thank you! We appreciate your feedback!