Explore Knowledge Articles
-
Application Note #232 - How to Retrofit a Wall-Mounted RF seeTouch Keypad into an Existing Home
This application note explains how to retrofit Lutron wall mounted wireless keypads into existing homes. Mount the wall-mounting bracket per the included instructions and attach the Pico remote control.
-
Application Note #109 - Guide to Using Dimmable Receptacles
A special Lutron receptacle, for dimming table/floor lamps, is available in two models: DDTR (Duplex), and HDTR (Half). Model DDTR (Duplex) allows both outlets to be used for dimming. FAQs Why do I need a special receptacle for dimming use?
-
Application Note #793 - Sunnata Switch MyLevel Personalization
MyLevel personalization gives you the ability to customize your Sunnata switch. From the main switch only, you can adjust the brightness of the light bar or turn off the locator light using MyLevel personalization.
-
Application Note #775 - Using Output Breakers with Dimmers and Switches
There are some applications where a breaker must be installed on the output of a Lutron control. This may be required due to the electrical codes in a specific region, or as a customer request to add additional protection for a control device.
-
Multi-location wiring of Sunnata PRO Dimmers & Switches
This article will provide instructions on how to successfully install a Lutron Sunnata Dimmer of Switch in a multi-location application.