maestro-hero-banner

Maestro Support

Looking for help? We've got you covered
Maestro Product Settings MSCL-OP153M How to change the...

Explore Knowledge Articles

Back

MSCL-OP153M How to change the level the Sensor turns on to

ka03c0000009YmIAAU
000002677
MSCL-OP153M – Auto-On Preset Brightness
This article will provide the steps needed to adjust the brightness level the motion sensor will turn the light onto when it detects motion.

Diagram, schematic Description automatically generatedProgrammable Options:
100% Brightness:
  1. Pull the FASS toward you into the OFF position.
  2. Press and hold the Tap button of the MSCL-OP153M.
  3. Push the FASS away from you into the ON position while continuing to hold the Tap button for approximately 5 seconds until Indicator Light (IL) 1 blinks quickly.
  4. Press the▲ button until IL 4 is illuminated, then Push the Tap button once.
  5. Press the▲ button until IL 7 is illuminated, then Push the Tap button once.
  6. Press and hold the Tap button for 5 seconds, and we are done!

50% Brightness:
  1. Pull the FASS toward you into the OFF position.
  2. Press and hold the Tap button of the MSCL-OP153M.
  3. Push the FASS away from you into the ON position while continuing to hold the Tap button for approximately 5 seconds until Indicator Light (IL) 1 blinks quickly.
  4. Press the▲ button until IL 4 is illuminated, then Push the Tap button once.
  5. Press the▲ button until IL 4 is illuminated, then Push the Tap button once.
  6. Press and hold the Tap button for 5 seconds, and we are done!

Preset - Unlocked:  returns to the previous light level.
  1. Pull the FASS toward you into the OFF position.
  2. Press and hold the Tap button of the MSCL-OP153M.
  3. Push the FASS away from you into the ON position while continuing to hold the Tap button for approximately 5 seconds until Indicator Light (IL) 1 blinks quickly.
  4. Press the▲ button until IL 4 is illuminated, then Push the Tap button once.
  5. Press the▲ button until IL 1 is illuminated, then Push the Tap button once.
  6. Press the▲ button until IL 7 is illuminated, then Push the Tap button once.
  7. Press the▲ button until IL 1 is illuminated, then Push the Tap button once.
  8. Press the ▼ button until IL 1 is quickly flashing and Release
  9. Press the ▼ button for approximately 3 seconds or until all ILs turn off. Note: The light will remain at its minimum output when you perform this action.
  10. Press the tap button once
  11. Press and hold the Tap button for 5 seconds, and we are done!

Preset - Locked: light will always turn on to a specified level.
  1. Pull the FASS toward you into the OFF position.
  2. Press and hold the Tap button of the MSCL-OP153M.
  3. Push the FASS away from you into the ON position while continuing to hold the Tap button for approximately 5 seconds until Indicator Light (IL) 1 blinks quickly.
  4. Press the▲ button until IL 4 is illuminated, then Push the Tap button once.
  5. Press the▲ button until IL 1 is illuminated, then Push the Tap button once.
  6. Press the▲ button until IL 7 is illuminated, then Push the Tap button once.
  7. Press the▲ button until IL 1 is illuminated, then Push the Tap button once.
  8. Press the ▲ or ▼ button to choose desired room light level.
  9. Press the Tap button once.
  10. Press and hold the Tap button for 5 seconds, and we are done!