maestro-hero-banner

Maestro Support

Looking for help? We've got you covered
Maestro Product Selection Selecting a Maestro Dual LED+...

Explore Knowledge Articles

Back

Selecting a Maestro Dual LED+ Dimmer

ka0PY00000001VZYAY
000003298

This article details various features and benefits of the Maestro LED+ dual controls to assist in choosing the correct device for your application.

Knowledge Article Contents:

Maestro LED+ Dimmer & Switch

Maestro LED+ Dimmer & Timer

Frequently Asked Questions

Related Articles

Maestro LED+ Dimmer & Switch (MACL-L3S25)

  • 2-in-1 dual “stacked” control.
  • Works with existing wiring, no neutral wire required.
  • Lutron’s LED+ Advanced Technology affords superior dimming of LED, incandescent, and halogen bulbs.
  • Single-pole installation only.
  • Dimmer rated for a maximum of 75W dimmable LED/CFL or 300W Incandescent/Halogen loads.
  • Switch rated for a max of 2.5A general purpose loads (lighting or fan) and works with high-efficiency DC-motor bathroom exhaust fans.
  • Power failure memory
  • MyLevel Personalization programming offers programmable settings:
    • Adjust dimmer’s fade-on/fade-off times.
    • Enable/disable/dim the LED indicator lights of the dimmer.
    • Adjust the dimmer’s high-end and low-end trim settings to select the maximum and minimum available light limits.

 

Maestro LED+ Dimmer & Countdown Timer (MACL-L3T251)

  • 2-in-1 dual “stacked” control.
  • Works with existing wiring, no neutral wire required.
  • Single-pole installation only.
  • Dimmer rated for a maximum of 75W dimmable LED/CFL or 300W Incandescent/Halogen loads.
  • Timer rated for a max of 2.5A general purpose loads (lighting or fan) and works with high-efficiency DC-motor bathroom exhaust fans.
  • Power failure memory
  • MyLevel Personalization programming offers programmable settings (in addition to those listed in the MACL-L3S25):
    • Preset option adjusts the timeout setting the load turns on to when the Tap button is pressed once.
    • Bypass option adjusts which timer level is selected when the Tap button is double pressed.
    • Load flash option determines if the load does a one second flash when the timer reaches the one-minute mark.

 

Frequently Asked Questions

Q: How do I know if I have an LED+ dual Maestro or an incandescent/halogen only version?

A: The LED+ dual Maestros have an LED rating stamped into the corner of the metal plate at the bottom of the dimmer. Previous versions will not display an LED load rating as they were not designed or rated for use with LED lights.

 

Q: My old Maestro countdown timer used to flash a one-minute warning. Does this dual LED+ dimmer/timer have the same feature?

A: Yes. However, this feature is disabled by default. Review the Maestro LED+ Dimmer/Switch and Dimmer/Timer Advanced Programming Mode guide linked below in the Related Articles section to enable this feature.

Related Articles

For programming options and instructions review the Maestro LED+ Dimmer/Switch and Dimmer/Timer Advanced Programming Mode.

For a detailed list of product specifications, including mixed-bulb-type ratings, product dimensions, and regulatory information, review the Maestro Dual LED+ Dimmer specification sheet.

Looking for a Maestro LED+ dimmer and fan speed dual control? Review the Selecting a Maestro Fan Control article for more info.