This article provides resources on properly installing a Lutron Maestro LED+ dual control.

This article is expected to take less than 5 minutes to complete.

Before You Begin

MACL-L3S25/MACL-L3T251 Installation

Related Articles

Before You Begin

Before installing your dual Maestro countdown timer, have the following items available: 

Maestro LED+ dual control

Flathead screwdriver

Phillips-head screwdriver   

Pliers

Maestro LED+ Dual Controls MACL-L3S25/MACL-L3T251 Installation

Choose your Maestro LED+ dual device below to view available installation resources:

Dimmer / Switch                     Dimmer / Countdown Timer  

Note: The Maestro LED+ dual dimmer/switch and dimmer/countdown timer are single-pole devices. They cannot be installed in a 3-way or 4-way. 

Frequently Asked Questions:

Do the Maestro LED+ dual controls require a neutral connection?

No. The Maestro LED+ dual controls do not connect to neutral. 

Do the Maestro LED+ dual controls have a minimum load requirement?

The minimum load of the dimmer is 25W of incandescent/halogen lighting load or a minimum of one compatible LED bulb from the Lutron LED Finder Tool. There is no minimum load requirement on the switch/timer. 

Are the Maestro LED+ dual controls compatible with DC-motor exhaust fans?

Yes. The switch/timer portion of the dual control is rated to control high-efficiency DC-motor exhaust fans. 

Can they be installed to control a receptacle?

No. The Maestro LED+ dual controls are rated for permanently installed fan and lighting loads only.

Related Articles

Looking for a Maestro LED+ dual dimmer and fan control? Click here to review the Selecting a Maestro Fan Control article to learn more about the MACL-LFQ.

Questions about programming your Maestro LED+ dual control? Click here to review the Maestro LED+ Dual Control Programming article for programming resources.