hero-banner-mob

Caséta Support

Looking for help? We've got you covered
Caséta Wireless Using the App Amazon Alexa and how to...

Explore Knowledge Articles

Back

Amazon Alexa and how to set up and use voice commands with the Caseta or RA2 Select Systems

ka03c0000000oVLAAY
000002494

Section (1)  Linking Alexa to the Lutron App for Caseta / RA2 Select


Requirements:
  1. Amazon Echo device or Alexa mobile app installed on a mobile phone (Android or iOS)
  2. Lutron App enabled Caseta or RA2 Select system with a Lutron Smart Hub (formerly Smart Bridge)
Step 1
From within the Alexa App, select "More" from the bottom right corner of the screen and then select "Skills & Games".
image.png

Step 2
From the "Skills & Games" screen tap on the magnifying glass in the top right corner of the screen and search for the Lutron Caseta Skill.
 
image.png
 
Then click on the skill and click enable.
image.png

Step 3
Enter you Lutron Account credentials that you used to setup your Lutron System and tap Sign in. (If a typo is made when entering your Lutron credentials you may get a message stating that the Home cannot be found. If you receive this message double check your email and password and retry).
image.png
Then tap on "Authorize".
image.png
This will then move you to the successful link screen as seen below.
image.png

Step 4
Discover Devices Screen. Tap on "Discover Devices". If this screen does not appear automatically, you can ask Alexa to "Discover Devices".
image.png
You should then receive the following message:
 
image.png

Your Lutron devices should now appear under "Devices" and "Scenes" in the Alexa app. You are now able to start  using voice commands.
 
image.png


Section (2):  Controlling multiple devices with one voice command.

A Group can be created to allow you to control multiple devices with one Alexa voice command.  Here are the steps to create a Group within the Alexa App

Step 1
To add a "Group" , select the "Device" icon at the bottom of the screen.
image.png

Step 2
Tap on the + icon in the top right corner of the screen (as seen in the picture above) and then select "Add Group" from the pop up that appears. 

Step 3
To create a Group in the Alexa App follow the steps below.
  • Tap on "Devices" in the lower option bar in the app.
  • Then Tap on the "+" in the top right corner of the Devices screen.
  • Select Add Group from the pop up window.
  • Select "Create room or device group" then select "Next".
  • Choose or create a custom group name.
  • Then select the devices to be part of this group and select finish.


Section (3):  Using Alexa voice commands to control your Lutron System

Below are some common Alexa voice commands to control your Lutron Caseta or RA2 Select system.  All of them can be used to control individual devices as named in the Lutron App -or- the Groups of devices you created in the Alexa App in the previous section 

“Alexa, turn on/off (Name of device as named in Lutron App)”

  • Turns all included lights to 100% or 0% (on or off respectively)

“Alexa, brighten/dim (Name of device as named in Lutron App)”
  • Increases/decreases the level of all included lights by 25%
“Alexa, brighten/dim (Name of device as named in Lutron App) by x percent”

  • Increases/decreases the level of all included lights by the requested percentage

“Alexa, set/turn (Name of device as named in Lutron App) to x percent”

  • Sets the level of all included lights to the requested percentage

“Alexa, raise/lower (Name of device as named in Lutron App)”

  • Same as brighten/dim

“Alexa, raise/lower (Name of device as named in Lutron App) … by x percent”

  • Same as brighten/dim