Skip to main content
Caséta Wireless Troubleshooting Caséta Wireless In-Wall Switches -...

Explore Knowledge Articles

Caséta Wireless In-Wall Switches - PD-5WS-DV, PD-5ANS, PD-6ANS

Caseta In-Wall Wireless Switches

Features

  • Turns wired lights or ceiling/exhaust fans on and off
  • Replaces existing light switch
  • Can be used with existing 3-way switches
  • For added convenience, use with a 2-button Pico remote (sold separately)

Model Numbers

  • PD-6ANS-__ (Color)
  • PD-5ANS-__ (Color)
  • PD-5WS-DV-__ (Color)

image.png

For more info on all of the Caseta Wireless products, please visit the Caseta Wireless Website
 

Documentation

 

Knowledge Article Contents

  • Section (1):  Choosing the correct switch for your application
  • Section (2) Product Installation
  • Section (3) Troubleshooting
  • Section (4):  Related Articles

Section (1):  Choosing the correct switch for your application

There are two main factors that will help you determine which Caseta Wall Switch is best suited for your application:
 
  1. Do you have a Neutral connection (White Wire) in your switch box?
US houses built from the mid 1980's typically have a neutral (white) wire in the switch box.  The neutral (white) wires are typically tied together with a wirenut.  Here is a picture of a typical switch box that contains neutral connections:


  image.png

If you have a neutral in the box, we recommend using either the PD-6ANS -or- PD-5ANS for the best compatibility with LED lamps and fixtures.

If you do not have a neutral wire in the switch box or you are not certain, the PD-5WS-DV would be the correct model.  
 
  1. Does you application require 277volts?
US homes operate at 120V.  There are some applications (typically in commercial buildings) that require 277V.  If your particular application requires 277V, then the PD-5WS-DV would be the correct model .

Caseta Wireless Switch Specifications
image.png
*  For 277V Load and Ganging/Derating information, please see the Caseta Wireless Load Control Spec Sheet

 

Section (2): Product Installation

  1. Installation instructions for PD-6ANS & PD-5ANS Caseta Wireless Switches.  
 WIRING
DIAGRAM
WALK ME
THRU
INSTALL
PD-6ANS
&
PD-5ANS
image.png1 LOCATION
(SINGLE POLE)
image.pngimage.png
image.png2 LOCATIONS WITH
MANUAL SWITCH
(3-WAY)
image.pngimage.png
2 LOCATIONS WITH
PICO REMOTE *
(3-WAY)
image.pngimage.png
image.png3 OR MORE
LOACTIONS WITH
PICO REMOTES *
(4-WAY)
image.pngimage.png
  
*  Pico Remotes are purchased separately.  To learn more about the Pico wireless remote including how to pair it to a Caseta Switch, click this LINK

INSTALLATION VIDEOS
 
  1. Installation instructions for PD-5WS-DV Caseta Wireless switches 
The LUT-MLC load adapter is provided to help ensure proper operation of the in-wall switch with LED, fluorescent, and ELV lighting loads.  When controlling one of these load types, a LUT-MLC may be required, especially at lower wattages.  If the status LED on the in-wall switch is flashing or a solid red color, a LUT-MLC must be installed.  It is recommended to install a LUT-MLC with these load types regardless of wattage to guarantee best performance.  Click this LINK for the LUT-MLC Installation Instructions

NOTE:  The PD-5WS-DV switch does not require a neutral connection.  If a neutral connection is available in the wallbox, Lutron strongly recommends using the PD-5ANS / PD-6ANS where possible.  This will help address potential issues with LED lamp and fixture compatibility.
  
 
 WIRING
DIAGRAM
WALK ME
THRU
INSTALL
PD-5WS-DVimage.png1 LOCATION
(SINGLE POLE)
image.pngimage.png
image.png2 LOCATIONS WITH
MANUAL SWITCH
(3-WAY)
image.pngimage.png
2 LOCATIONS WITH
PICO REMOTE *
(3-WAY)
image.pngimage.png
image.png3 OR MORE
LOACTIONS WITH
PICO REMOTES *
(4-WAY)
image.pngimage.png
 
*  Pico Remotes are purchased separately.  To learn more about the Pico wireless remote including how to pair it to a Caseta Switch, click this LINK
 
INSTALLATION VIDEOS

 

Section (3): Troubleshooting

SYMPTOMS       PROBABLE CAUSEACTION
Lights do not turn on
OR In-wall switch LED does not light up
Red and Black wires incorrectly connectedSwap Red and Black wire connections
Light bulb(s) burned outReplace bulb(s)
Circuit breaker is tripped or OFFRe-set circuit breaker
Light fixture incorrectly installedReview fixture wiring
FASS on the Caseta switch is in the OFF positionRe-set the FASS Switch (see below)
 
LED on Caseta Switch is flashing OR a solid RED ColorProper bulb operation requires LUT-MLC installationInstall LUT-MLC
 

FASS Switch
image.png
 

SECTION (4)  RELATED ARTICLES

Caséta Wireless In-Wall Dimmers - PD-6WCL, PD-5NE, PD-10NXD

The Caséta Smart Bridge

The Pico Remote and its use in the Caseta System

Caséta Plug-In Lamp Dimmer - PD-3PCL

Caséta Wireless Outdoor Smart Plug - PD-15OUT-BL