Please Read Before Installing
WARNING: ELECTRIC SHOCK HAZARD. May result in serious injury or death. Turn off power at circuit breaker or fuse before installing. | |
CAUTION : Use only with permanently installed fixtures with dimmable LED, dimmable CFL, halogen, or incandescent lamps. To avoid overheating and possible damage to other equipment, do not use to control receptacles, motor-driven appliances, or transformer-supplied appliances. |
Install in accordance with all national and local electrical codes.
For Indoor Use Only.
Dimmer does not work if Neutral (white wire) is not connected.
To ensure proper FASS operation, ensure the Hot (black wire) and Load (red wire) are not reversed.
Limited Warranty: www.casetawireless.com/warranty. For a physical copy of warranty information, call 1.844.403.1795 (Mexico: 614.481.1300)
Scroll down and click Accept to view installation information online. To receive a physical copy of the installation guide, call 1.844.403.1795 (Mexico: 614.481.1300)
Veuillez lire avant de procéder à l’installation
AVERTISSEMENT : RISQUE D'ÉLECTROCUTION. Peut causer des blessures graves ou la mort. Coupez l'alimentation au niveau du disjoncteur du fusible avant l'installation. | |
ATTENTION : À utiliser seulement pour des luminaires installés de façon permanente avec des ampoules DEL variables, AFC variables, halogènes ou incandescentes. Pour éviter toute surchauffe et d’endommager d’autres équipements, n’utilisez pas ce produit pour commander des prises, des appareils motorisés ou des appareils alimentés par transformateur. |
Effectuez l’installation en conformité avec les codes électriques en vigueur.
Utilisation à l’intérieur seulement.
Le gradateur ne fonctionne pas si le neutre (fil blanc) n’est pas connecté.
Pour garantir le bon fonctionnement du FASS, assurez-vous que les fils conducteur (fil noir) et de charge (fil rouge) ne sont pas inversés.
Garantie limitée : www.casetawireless.com/warranty. Pour obtenir une copie physique des information de garantie, appelez le 1.844.403.1795 (Mexico: 614.481.1300)
Défilez vers le bas et cliquez sur Accepter pour afficher les informations d'installation en ligne. Pour obtenir une copie physique du guide d'installation, appelez le 1.844.403.1795 (Mexico: 614.481.1300)
Por favor leer antes de instalar
ADVERTENCIA: PELIGRO DE DESCARGA ELÉCTRICA. Podría ocasionar lesiones graves o la muerte. Antes de instalar desconecte la alimentación eléctrica en el disyuntor o el fusible. | |
PRECAUCIÓN: Úselo únicamente con artefactos instalados permanentemente con lámparas LED atenuables, LFCA atenuables, halógenas o incandescentes. Para evitar el sobrecalentamiento y posibles daños a otros equipos, no lo utilice para controlar tomacorrientes, artefactos accionados a motor o aparatos provistos de transformador. |
Instale de acuerdo con todas las normativas eléctricas nacionales y locales.
Sólo para uso bajo techo.
El atenuador no funciona si el neutro (cable blanco) no está conectado.
Para garantizar el correcto funcionamiento del FASS, asegúrese de que los cables del vivo (cable negro) y de la carga (cable rojo) no estén invertidos.
Garantía limitada: www.casetawireless.com/warranty. Para obtener una copia física de la información de la garantía, llame al 1.844.403.1795 (Mexico: 614.481.1300)
Desplácese hacia abajo y haga clic en Aceptar para ver la información de instalación en línea. Para obtener una copia física de la guía de instalación, llame al 1.844.403.1795 (Mexico: 614.481.1300)
ELV+ Smart Dimmer
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.

No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.

Step-by-Step Tutorial

ELV+ Smart Dimmer
PD-5NE

Watch an Installation Video
Limited Warranty: www.casetawireless.com/warranty. For a physical copy of warranty information, call 1.844.403.1795 (Mexico: 614.481.1300)
To receive a physical copy of the installation guide, call 1.844.403.1795 (Mexico: 614.481.1300)