
Claro Smart Switch
DVRF-5NS
How do I find my Model Number?
Do you have the original packaging?
-
If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.
Most model numbers are 12-16 characters and start with a couple letters followed by a dash.

No packaging? No problem!
-
The product number is on a label on the side of the dimmer or switch.*
If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.
*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.


WARNING: Shock Hazard: May result in serious injury or death. Turn off power at the circuit breaker or fuse before installing.
Walkthrough Tutorial
Recommended method for first-time installers
Installation Video
Step-by-step instructions on how-to install your dimmer.
Wiring Diagram
Illustrated, standard dimmer and backbox wiring information.
Instruction Sheet
PDF instruction sheet
Unusual Wiring Scenarios
Examples of additional wiring scenarios
The Light or Switch Does Not Turn On
List of potential causes and recommended solutions.
Pico Remote Does Not Control The Switch
List of potential causes and recommended solutions.
The Claro Smart Switch is Blinking
List of potential causes and recommended solutions.
Programming and System Support
Is Someone Available at Lutron to Help Me?
Guidance to get your project up and running
Technical support specialists are available 24/7
If you run into any trouble or have questions on Lutron products, give us a call anytime at 1-844-403-1795.
How to Use The Claro Smart Switch
How to use your dimmer.
Pair a Pico Remote Without the Lutron App
How to pair a Pico with the Claro Smart Switch
Pair a Sensor Without the Lutron App
How to pair a Sensor with the Claro Smart Switch
Add a Device to The Lutron App
How to add a device to the Lutron app
Reset Claro Smart Switch to Factory Settings
How to factory reset the Claro Smart Switch
Leave an Online Review
Your review will be displayed on our major retailer websites.
Warranty
Every Lutron dimmer includes a standard warranty.
Register Your Dimmer
In exchange for your honest feedback, Lutron will extend the dimmer warranty for one year